Service Hotline 029-81320570
Home > DrillingEquipment&Matching > KT Integrated open hole drill > KT7 Integrated open hole drill

    KT7 Integrated open hole drill

    "Kaishan" brand KT7 integral high-pressure open-air DTH drilling rig is an advanced drilling equipment which combines DTH drilling system with screw air compression system.

    1. Detailed information

    KT7 Integrated open hole drill:

    "Kaishan" brand KT7 integral high-pressure open-air DTH drilling rig is an advanced drilling equipment which combines DTH drilling system with screw air compression system. It uses a six-cylinder diesel engine to provide power for the two systems, with compact structure, good integrity and easy movement. The single-stage compressed high-pressure screw head equipped with core knowledge products of the drilling rig is equipped with the internationally leading Torres Y-line, which has a large flow rate (13m/min) and a high pressure (1.7MPa), providing strong power for the high-pressure pneumatic impactor. The rock drilling speed is 20% - 50% higher than that of the stroke drilling rig.

    "Kaishan" brand KT7 integral high wind pressure open-pit DTH drill is mainly used for rock drilling in stone works and open-pit mines.


    KT7 Basic parameters

    Rock drilling hardness

    f=6-20

    Rotary torque(N*m)

    1900

    Borehole diameter(mm)

    90-105

    Maximum pull force(N)

    25000

    Economic hole depth

    30

    Lifting angle of carriage

    向上28°   向下42°

    Walking speed(Km/h)    

    0-2.5                 

    Pitching angle of carriage

    129°

    Climbing ability

    30°

    Slide angle

    向右38°   向左35°

    Ground clearance(mm)

    380

    Lateral horizontal pendulum angle of carriage

    向右4°      ~89°

    The rated power(Kw)

    180

    Drill arm swing angle

    向右39°   向左60°

    Diesel engine

    YC6A

    Leveling angle of frame

    向上10°   向下

    Displacement of screw machinem³/min)

    13

    Advance length(mm)

    3000

    Screw machine exhaust pressure(Mpa)

    1.7

    Compensation length(mm)

    900

    Shape size(mm)

    8000×2260×2800

    Impactor

    KQG35A(选配HD45S)

    Weight(Kg)

    9500

    Drill pipe

    Φ64×3000mm

    Speed of gyration(r/min)

    0-120

    Dust catching mode

    Laminar flow of hydraulic cyclone